Drywall Finishing in Greenville, SC
Drywall finishing in Greenville, SC costs $0.80 to $2.20 per square foot depending on the finish level (Level 1 through Level 5). Most Greenville homes get a Level 4 finish — three coats of joint compound, sanded smooth, ready for flat or eggshell paint. Level 5 (full skim coat) is reserved for glossy paints, raking light, or luxury homes.
- Licensed & Insured in SC
- Free Estimates
- USG · National Gypsum · CertainTeed
What Is Drywall Finishing?
Drywall finishing is the multi-step process of taping seams, applying joint compound, sanding, and texturing newly hung drywall so it's ready for primer and paint. The Gypsum Association defines six levels (0 through 5). Level 0 is unfinished. Level 1 is just tape and one coat — used in concealed areas. Level 2 adds a thin coat over the tape and fasteners — appropriate for garages or storage. Level 3 adds a second coat — appropriate for textured walls. Level 4, the residential standard, adds a third coat sanded smooth. Level 5 adds a full skim coat across the entire surface — the smoothest possible finish, required under glossy paints or in rooms with strong side lighting.
Drywall Finishing Cost in Greenville, SC
Finishing-only work in Greenville averages $0.80–$1.20/sqft for Level 3, $1.10–$1.60/sqft for Level 4, and $1.60–$2.20/sqft for Level 5. Texture (orange peel, knockdown, skip trowel) is included with Level 3–4 in most quotes. A 1,500 sqft repaint-prep finishing job typically runs $1,500 to $2,400.
| Item | Typical Cost |
|---|---|
| Level 1 (tape only) | $0.30 – $0.55 / sqft |
| Level 2 (one coat) | $0.55 – $0.80 / sqft |
| Level 3 (textured walls) | $0.80 – $1.20 / sqft |
| Level 4 (residential standard) | $1.10 – $1.60 / sqft |
| Level 5 (full skim coat) | $1.60 – $2.20 / sqft |
Our Drywall Finishing Process
- 1Inspect hung drywall — flag any board that needs re-hanging before tape goes on.
- 2Tape all seams (paper tape) and inside corners; mesh tape on butt joints.
- 3First coat of joint compound — fills tape, screw heads, and corner bead.
- 4Second coat — wider knife, feathered out 8–10 inches.
- 5Final coat plus sanding to your finish level.
- 6Apply texture or skim coat per spec; final QC walk.
Why Choose Professional Drywall Finishing in Greenville?
Finish quality is what people actually notice in a finished room. A poor Level 4 finish shows every screw pop and seam under afternoon light through Greenville's big windows. Our finishers are full-time mud-and-tape specialists — not framers covering for the day. We deliver consistent finish across the whole project, with the right finish level matched to how the room will be lit and painted.
Frequently Asked Questions
More Drywall Services in Greenville
Get a Free Drywall Finishing Estimate
Ready for Drywall Finishing in Greenville?
Same-day estimate response. Licensed and insured throughout South Carolina. Residential and commercial.